E058-A3
| Product Name | E058-A3 |
| Product Type | POE-g-MAH |
| Appearance | Colorless to semi-translucent yellowish granules |
| Density (g/cm³) | 0.87±0.02 |
| Melting Point (℃) | 66 |
| [1] MFR (g/10min) | ≥0.2 |
| [2] Grafting Ratio | Very High |
| Dosage | 2-18% |
| Packaging | 25KG Bag |
| Delivery Time | 10 Working Days |
Disclaimer: Data provided is based on internal laboratory testing and serves as a reference for material selection. It shall not be construed as product specifications.
Testing Limitations: Due to limited data and experience, the above performance metrics are for reference only.
Notes:
[1] MFR measured at 190°C, 2.16 kg load.
[2] Grafting ratio classification: Ultra high: >1.8% | Very High: 1.0–1.2% | High: 0.8–1.0% | Moderately high: 0.5–0.8% | Medium: ≈0.5%.
Introduction
E058-A3 is a high-performance elastomer graft modifier designed for nylon (PA) low-temperature toughening. By introducing low-temperature creep-resistant components, it maintains excellent toughening effects in -40℃ extreme environments, with 20–30% higher toughness than similar products. It’s widely applied in PA reinforcement, filling, flame-retardant systems, and PA/PP alloy modification. Its special comonomer structure gives TPE overmolding systems excellent interfacial adhesion and tear resistance, making it an ideal choice for engineering plastics low-temperature toughening and overmolding composites.
application
1、PA, TPE toughening overmolding systems,
2、PA/PP alloy systems,
3、PA reinforcement, toughening, filling, and flame-retardant systems.
related parameters
| Product Name | E058-A3 |
| Product Type | POE-g-MAH |
| Appearance | Colorless to semi-translucent yellowish granules |
| Density (g/cm³) | 0.87±0.02 |
| Melting Point (℃) | 66 |
| [1] MFR (g/10min) | ≥0.2 |
| [2] Grafting Ratio | Very High |
| Dosage | 2-18% |
| Packaging | 25KG Bag |
| Delivery Time | 10 Working Days |
Disclaimer: Data provided is based on internal laboratory testing and serves as a reference for material selection. It shall not be construed as product specifications.
Testing Limitations: Due to limited data and experience, the above performance metrics are for reference only.
Notes:
[1] MFR measured at 190°C, 2.16 kg load.
[2] Grafting ratio classification: Ultra high: >1.8% | Very High: 1.0–1.2% | High: 0.8–1.0% | Moderately high: 0.5–0.8% | Medium: ≈0.5%.
Packaging and Storage
25 KG kraft paper bags with inner plastic liners.
Store in dry, ventilated, cool conditions (≤25°C). Avoid humidity and direct sunlight. Use promptly after opening.
